Strat Pickguard HSH, Mini Switch Style
Click To Enlarge

Standard Strat HSH (Humbucker-Single-Humbucker) Pickguard
Choice of Colors, Switch Holes, and Pot Holes

Brand New Hum-Single-Hum (H.S.H.) Pickguard
Stratocaster Standard Guard Fits Fender (see below for fit notes)

~~~~~~~~~~ITEM DESCRIPTION~~~~~~~~~~

This Humbucker Single Humbucker (H-S-H) Stratocaster Pickguard is cut for one humbucker at the bridge, a single coil in the middle, and one humbucker at the neck. It features a shielded electronics area with superior coverage. Our Hum Sin Hum Guard has an 11-hole mounting pattern to fit U.S.A. Fender Standard Strats and MIM (Made in Mexico) 2002 & newer Standard Strats. This style of guard DOES NOT have a blade-switch cut. This pickguard WILL NOT work with a Floyd Rose tremolo.

Up to three mini-switch holes and three pot holes can be pre-drilled for your convenience to allow for a variety of pickup wiring and playing options.

Guard Color Notes

BLACK (Black-White-Black/BWB): This 3-Ply Guard consists of 3 separate layers in Black, White, Black order with a white layer sandwiched between two black layers. This creates a "white band/stripe" look along the side edge of the pickguard. The face of the guard is black as shown in the item image.

WHITE (White-Black-White/WBW): This 3-Ply Guard consists of 3 separate layers in White, Black, White order with a black layer sandwiched between two white layers. This creates a "black band/stripe" look along the side edge of the pickguard. The face of the guard is white as shown in the item image.

~~~~~~~~~~PRODUCT HIGHLIGHTS~~~~~~~~~~
*Brand new HSH pickguard
*Fender replacement H-S-H guard
*11 hole typical mounting pattern
*Fits mounting pattern for American (U.S.) Fender Standard Strats
*Fits mounting pattern for Mexican (MX or MEX) Standard Strats 2002 & newer
*Aluminum shielded electronics area
*1 rectangular standard size humbucker bridge pickup mounting hole (not counter-sunk)
*1 standard size and shape single coil middle pickup mounting hole (not counter-sunk)
*1 rectangular standard size humbucker neck pickup mounting hole (not counter-sunk)
*2 pickup mounting screw holes per pickup opening (centered one each side; not counter-sunk)
*Protective layer of film covering face of guard (to be removed after installation)

Your choice of switch option guard drilling (choose one of the following options):
*None (left blank for you to drill or cut as you choose)
*3 Mini Switch Holes drilled for you as shown (Position 5)

Your choice of up to three pot holes as follows (choose from the following options).
*P0 – Position #0 – NO Hole (undrilled – you drill where you like)
*P1 – Position #1 – Standard Strat Volume Hole
*P1.5 – Position #1.5 – Slight Offset between Position #1 and Position #2
*P2 – Position #2 – Standard Strat Middle Tone
*P3 – Position #3 – Standard Strat Bottom Tone
*P4 – Position #4 – Offset (may require extra routing)

IMPORTANT NOTES regarding hole placement options.
*Position #4 may not fit in a standard Strat route on some models and additional routing may be required with this selection.
*Hole Placement - Be aware of your knob circumference and hole placement as some hole options are too close together to allow adjacent standard size pot placement. Your choices for hole positions are your own and not our responsibility. We have no knowledge or control over the knobs you choose to install. Please think ahead! If you are unsure, we recommend classic styling (three pot holes in Positions 1, 2, & 3 along with three mini-switch holes in Position 5).

~~~~~~~~~~WHAT’S INCLUDED~~~~~~~~~~

*1 Quantity Strat HSH (Humbucker Single Humbucker) Pickguard

Nothing else is included. Any extra images are provided for additional reference and comparison purposes only. There are no diagrams or instructions provided with this item.

This pickguard will not fit other guitars or styles and will not work with specialty sized pickups. It WILL NOT FIT a “Squier” “Deluxe” “Light” any Artist Series or Reissue, or anything else other than “FENDER STANDARD” model guitars in the years and configuration specified above.

~~~~~~~~~~PURCHASE NOTES~~~~~~~~~~

Allow and expect variation in color due to photo and monitor settings as well as natural product variance. CONTACT US PRIOR TO PURCHASE if you have any questions or concerns regarding color, pattern, fit, materials, installation requirements, compatibility with your instrument, measurements provided, or anything else.

Inspect your order carefully upon receipt for any shipping damage, fit on your guitar, color, and general appearance. Your new pick guard will be shipped to you with a layer of protective film covering the guard surface. DO NOT remove the protective film, modify or install the guard if it does not meet with your approval for any reason. We pledge to address any problems or concerns you have PRIOR to installation. If everything is in order upon receipt, simply install carefully and then slowly peel off the protective covering to enjoy.

  • Item #: 10149

Strat Pickguard HSH Standard - Switch, Pot Hole, & Color Choices

Price: $9.95
* Marked fields are required.
Availability: In-Stock
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review