Strat Pickguard HS, Pearl Colors
Click To Enlarge

Dragonfire Strat Pickguard HS – Humbucker Single
Choice of Pearl Guard Colors & Volume Hole Position
New, 3 Ply Pearloid/Perloid H.S. Pickguard - Standard Strat Humbucker-Single, Fits Fender

This pickguard (PG) may also be referred to as Single Humbucker, Sin-Hum, Single Hum, Sin-Humbucker, Hum Sin, Hum Single, or Hum-Sin Style Pickguard or as US, U.S., USA, U.S.A., MEX, MX, Mexican, or MIM Style.

This Triple-Ply guard is cut for one humbucker at the bridge and a single coil at the neck. It features a shielded electronics area with an 11-hole mounting pattern to fit U.S. Fender Standard Strats and MEX 2002 & newer Standard Strats. This pickguard will not fit other guitars or styles and will not work with specialty sized pickups. Please contact us prior to purchase if you have any questions regarding fit.

Product Highlights

  • Triple ply brand new pickguard/Fender replacement pickguard
  • 11 hole standard mounting pattern with counter-sunk mounting screw holes
  • Aluminum shielded electronics area
  • Fits U.S. Fender Standard Strats
  • Fits Mexican Standard Strats 2002 & newer
  • Rectangular standard size humbucker pickup mounting hole (not counter-sunk)
  • Rounded-edge standard size single pickup mounting hole (not counter-sunk)
  • 2 pickup mounting screw holes per pickup opening (centered one each side; not counter-sunk)
  • 1 standard size switch cut with 2 switch mounting holes (1 each side of switch cut; not counter-sunk)
  • Your choice of no hole (undrilled) or up to three volume/tone holes drilled in your choice of positions

What’s Included

  • 1 quantity Standard Strat HS – Humbucker-Single Pickguard (in color/style noted above)

Nothing else is included. Any extra images provided with this listing are for additional reference and comparison purposes only. There are no diagrams or instructions provided with this item.

You Choose, We Drill!
This guard can come without a volume hole (undrilled so you can drill how and where you like) or with up to three holes drilled in the position(s) of your choice. Just tell us how you would like your new pickguard sent to you and we are happy to accommodate your preference. Please check out the provided reference image for hole placement options.

  • P0 – Position #0 – NO Hole (undrilled – you drill where you like)
  • P1 – Position #1 – Standard Strat Volume Hole
  • P1.5 – Position #1.5 – Slight Offset between Position #1 and Position #2
  • P2 – Position #2 – Standard Strat Middle Tone
  • P3 – Position #3 – Standard Strat Bottom Tone
  • P4 – Position #4 – Offset (may require extra routing)

IMPORTANT NOTES regarding hole placement options. Thank you for your attention to these important details.

  • Position #4 may not fit in a standard Strat route and additional routing may be required with this selection.
  • If you choose more than one volume/tone hole drilled, be aware of your knob circumference and hole placement as some hole options are too close together to allow adjacent standard size pot placement. Your choices for hole positions are your own and not our responsibility. We have no knowledge or control over the knobs you choose to install. Please think ahead! If you are unsure, the safest hole placement options are Position 1, Position 2, and Position 3. These are the standard Volume-Tone-Tone (VTT) hole placements and will work with standard set-ups.

Please allow and expect color variation due to photo and monitor settings as well as natural product variance. We have made an effort to provide a sample image best representing the color, pattern, or shading of this pickguard. Some colors or patterns are extremely difficult to accurately portray in pictures. If you are looking for a particular shade, color, or pattern or are trying to match an existing color or theme on your guitar, we do not recommend purchasing from our online store. We want you to be completely satisfied with your pickguard and thank you for understanding that we cannot guarantee a particular look. Please note that mirror guards are partly made of an acrylic material designed to protect the mirror finish and will reflect surroundings. As such, mirror guards will not look the same in your space compared with our shop where the pictures were created. This is also true for other colors since guards may not look the same as the image provided depending on your monitor, environment, lighting, contrasting colors, individual perception, etc.

Be sure to inspect your new guard carefully upon receipt for any shipping damage, fit on your guitar, color, and general appearance. Your new pick guard will be shipped to you with a layer of protective film covering the guard surface. Do not remove the protective film, modify or install the guard if it does not meet with your approval for any reason. We are happy to process a return so long as the guard is not installed and the protective covering is intact. We are not able to offer exchanges. We pledge to address any concerns you have prior to installation. Note that we do not recommend installation using power tools as these can put too much force on the pick-guard and cause damage. If everything is in order upon receipt, simply install carefully and then slowly peel off the protective covering to enjoy!

This item will not fit on anything other than what is expressly stated. There are no additional items included with this purchase other than what is noted under “What’s Included” above.

  • Item #: 10254

Strat Pickguard HS, Choice of Pearl Colors

Price: $17.95
3 or more: $16.95 each
10 or more: $15.95 each
* Marked fields are required.
Availability: In-Stock
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review