SoCal Strat HS Floyd Rose Guard, CUSTOM
Click To Enlarge

SO-CAL FLOYD ROSE STRAT HS PICKGUARD

Charvel Style SoCal FR Guard

CUSTOM Style (CHOICE of volume & switch holes)
CHOICE OF COLORS

~~~~~~~~~~ITEM DESCRIPTION~~~~~~~~~~

This Humbucker Single (H-S) Stratocaster Floyd Rose (F.R.) Pickguard is cut for one humbucker at the bridge and a single coil at the neck. Our Hum Sin Floyd Rose So-Cal Guard has an 11-hole mounting pattern to fit U.S.A. Fender FLOYD ROSE Strats and MIM (Made in Mexico) 2002 & newer FLOYD ROSE Strats. Floyd Rose Cut pickguards are designed for a Floyd Cut FR Tremolo rather than a Standard Strat set-up. Floyd Rose Style Tremolos require a larger cut-out/different guard shape. Floyd Rose guards will not fit a guitar with a standard-sized trem. 

These So-Cal pickguards are specialized 1 Humbucker 1 Single (H/S) guards with rounded corner pickup holes (NOTE that these guards will not work with covered or active humbuckers). We offer this Hum-Sin guard in three styles: Bare, Classic, and Custom.

PRODUCT HIGHLIGHTS

  • Brand new HS pickguard
  • Fender replacement H.S. guard
  • 11 hole standard mounting pattern
  • Counter-sunk mounting screw holes
  • Fits American (U.S.) Fender FLOYD ROSE Strats
  • Fits Mexican (MX) FLOYD ROSE Strats 2002 & newer
  • Aluminum shielded electronics area
  • Rounded-corner pickup mounting holes
  • 2 pickup mounting screw holes per opening
  • Protective layer of film covering face of guard

SoCal CUSTOM Options
Your choice of switch option guard drilling:

  • None (left blank for you to drill or cut as you choose)
  • 1 Switch Hole for 3 Way Toggle Style Switch drilled in Position 2.5
  • 2 Mini Switch Holes drilled for you as shown in the provided reference image

Your choice of a single pot hole as follows (choose one of the following):

  • P0 – Position #0 – NO Hole (undrilled – you drill where you like)
  • P1 – Position #1 – Standard Strat Volume Hole
  • P1.5 – Position #1.5 – Slight Offset between Position #1 and Position #2
  • P2 – Position #2 – Standard Strat Middle Tone
  • P3 – Position #3 – Standard Strat Bottom Tone
  • P4 – Position #4 – Offset (may require extra routing)

IMPORTANT NOTES regarding hole placement options. Thank you for your attention to these important details.

*Position #4 may not fit in a Standard Strat route on some models and additional routing may be required with this selection.

*Mirror guards may be more difficult to drill successfully; these may require extra skill and patience. Drilling mirror guards is not recommended for novices.

*Hole Placement - Be aware of your knob circumference and hole placement as some hole options are too close together to allow adjacent standard size pot placement. Your choices for hole positions are your own and not our responsibility.

*You can use a full-size or mini-size volume pot with any choice of pot hole.

What’s Included

  • 1 Floyd Rose Strat H.S. Pickguard

Nothing else is included. Any extra images are provided for additional reference and comparison purposes only. There are no diagrams or instructions provided with this item. We do not provide technical or any other type of support for installation, configuration, or use of this item.

This pickguard will not fit other guitars or styles and will not work with specialty sized pickups. It WILL NOT FIT “Squier” “Deluxe” “Light” any Artist Series or Reissue, or anything else other than “FENDER STANDARD” FLOYD ROSE model guitars in the years and configuration specified above. Please contact us prior to purchase if you have any questions regarding fit.

~~~~~~~~~~PURCHASE NOTES~~~~~~~~~~

Color descriptions in titles and product descriptions represent COLORS only, not material. Please allow and expect variation in color due to photo and monitor settings as well as natural product variance. We have made an effort to provide a sample image best representing the color, pattern, or shading of this item.

Be sure to inspect your order carefully upon receipt for any shipping damage, fit on your guitar, color, and general appearance. Your new pick guard will be shipped to you with a layer of protective film covering the guard surface. DO NOT remove the protective film, modify or install the guard if it does not meet with your approval for any reason. We will address any problems or concerns you have prior to installation.

If everything is in order upon receipt, simply install carefully and then slowly peel off the protective covering to enjoy. Note that we do not recommend installation using power tools as these can put too much force on the product and cause damage; this is especially true with mirror guards. 

  • Item #: 10289

SoCal HS FLOYD ROSE Strat Guard, Charvel Style, SO-CAL CUSTOM

Price: $20.95
* Marked fields are required.
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review