Dragonfire Prewired Quad Hum Guard
Loaded Mini Bucker Pickups
FOUR Mini Humbuckers Wired Pickguard
Your Choice of Pickup and Guard Colors
FOUR Mini Switch Toggle Controls
HHHH Custom Guard, Built to Order Prewired

This loaded guard is prewired on a Quadruple Humbucker Strat Pickguard cut for four mini humbuckers. Be sure to check your body routing to make sure your set-up allows for this four-pickup build. Let us know if you have any questions about any of the available options.

Wired on a custom cut pickguard to fit the mini-humbucker size, this prewired guard showcases Dragonfire Mini Buckers for the sweet warmth and clarity you crave from vintage wound pickups in the classic mini size. The Mini Buckers AlNiCo 5 styling can provide you with vintage authenticity, strong bass and highs along with great performance for rhythm and lead. Featuring four mini switch toggle controls, this build put you squarely in the driver's seat with your choice of 2-way (full/off) or 3-way (full/off/split) options independently controlling each of the four mini buckers.

~~Build & Guard Details~~
*Brand New Customized Prewired Pickguard
*FOUR Mini Switch Toggle Controls (1 per pickup)
*6 String Standard Fender® Strat Replacement Guard
*Standard USA & MEX/MIM 2002 & Newer Style Fit
*Protective Film Surface Cover (remove after install)
*Aluminum Shielded Electronics Area (shape/color may vary)
*View Guard Color Samples HERE

~~Pickup Details~~
*Dragonfire Mini Bucker Passive Humbucker Pickups
*Alnico 5 / Alnico V (A5 / AV) Pickup Magnet Style
See below in the related items section for pickup details.

~~Selection Options~~
This build is available in many colors/styles with a variety of personalization and upgrade options. These are not cookie-cutter mass-produced generic creations. All wiring is done in house, customized just for you to create your ideal guard. We know players’ needs are varied and unique. Your selections and any addition of effects or upgrades will determine ultimate layout and functionality and may necessitate, at our discretion, substitution of component styles depending on options chosen. Wiring upgrade and onboard effects option information can be found on our store’s Prewired Landing Page. Contact us if you have any questions about the options available for this build.

~~Installation Information~~
No diagrams are included. Your loaded guard will come with three open wires. Red is hot and is soldered to the tip of your jack. If you select a jack, this will be pre-done for you so you’ll unsolder, feed the wires through your channel, and resolder. Jacks work with standard cables only and jack sockets accept standard ¼” plugs. Both blacks are grounds. One is soldered to the jack sleeve and the other is grounded to your trem/bridge. If your selections require alternate installation, additional instructions will be included in your shipment. Take your time for installation; do not use power tools and do not over-tighten screws or other components.

~~Purchase Notes~~
Please check your instrument and set-up needs carefully to see if this item will work for you.

Buyers assume all risk of use; sales are only offered to those competent to safely and lawfully purchase and use items.

These guards will not fit anything other than specifically noted compatible models. They will not work with non-standard components or systems. Guards are not guaranteed to fit “Squiers” and will not fit “Deluxe” “Light” any Artist Series or Reissue, or anything else other than “Fender® Standard” model guitars in the years and configuration noted. Non-standard selections may require body modifications. Your selections are your own – we will create your guard to order per your specifications so please know your needs prior to purchase.

Depending on your set-up, you may require adjustment. Ask in advance and we are happy to provide fit/compatibility information or make special arrangements if possible. Do not buy if you are unsure of your requirements, needs, or ability to make any required adjustments.